Introduction

Block Storage allows you to manage additional storage for your DigitalOcean Droplets in a way similar to using hard drives. Adding block storage to our Droplets can be done with a few clicks from DigitalOcean’s streamlined GUI or graphical user interface. However, this is not a practical way of operating in larger and more complex environments, so DigitalOcean offers an API to work at scale. We can interact directly with the API through doctl, DigitalOcean’s official command-line tool.

In this tutorial, we’ll learn how to use doctl to create, list, attach, detach, and delete block storage volumes from our Droplets.

Prerequisites

Before starting this tutorial, you should familiarize yourself with doctl and DigitalOcean’s block storage. The following articles will be helpful:

• How To Use Doctl, the Official DigitalOcean Command-Line Client
• Getting Started with DigitalOcean Block Storage

You should make sure you have the latest version of doctl (at the time of this writing it’s 1.7.1) installed and authenticated before continuing. Check your doctl version by running doctl version. You will also need to have an SSH key added to your DigitalOcean account.

Last but not least, to follow this tutorial you will need a Droplet created on one of the regions that allow the use of block storage (at the time of this writing, the following regions offer block storage: BLR1, FRA1, LON1, NYC1, NYC3, SFO2, SGP1, and TOR1).

Note: While the regions mentioned above support block storage, this feature is not currently available for all Droplets in the noted regions. To ensure that the Droplet you are working on supports block storage, you will have to attach a volume to it at the time of creation.

Creating Volumes

In order to create a volume with doctl, you need to provide the following parameters to the command:

• volume name: in our example it will be firstvolume
• region: for our tutorial we’ll create the volume in NYC3
• size (defaults to 4TB): in this example we’ll set it to 100 GiB

You can also provide a description with the desc flag but that’s entirely optional. The full command will look like this:

doctl compute volume create firstvolume --region nyc3 --size 100GiB

You should see an output similar to this:

Output
ID                                      Name           Size      Region    Droplet IDs
______your_volume_ID1_______            firstvolume    100 GiB    nyc3    

At this point, you know the doctl command and what information is required to create a new volume. Next, you will learn how to print a complete list of existing volumes.

Listing Volumes

doctl provides us with the ability to show existing volumes in a formatted list. There are a few reasons why you would want to list your volumes. The two most common ones being to display the ID of each volume to be used in later commands, and to display which Droplets have volumes assigned to them.

To list all current block storage volumes, you can run the following command.

doctl compute volume list

This is the output of the list command run in our example.:

Output
ID                                      Name              Size        Region    Droplet IDs
______your_volume_ID1______             firstvolume       100 GiB     nyc3      
______your_volume_ID1______             secondvolume      4096 GiB    nyc3      
______your_volume_ID1_______            thirdvolume       100 GiB      nyc3      [ID]

In this section, you have learned the doctl command to see a list of volumes you have created. In the next section, we’ll go over how to attach a volume to a Droplet.

Attaching Volumes

Sometimes your Droplet may need extra space to handle assets such as application data and configuration files. Adding a volume is a great way to add this space without disrupting service.

To attach volumes you will need two pieces of information:

• the volume ID
• the Droplet ID

In the previous section, we’ve seen how to obtain the volume ID by using the doctl compute volume list command.

We can get our Droplet ID by running the following command to display information about our account’s Droplets:

doctl compute droplet list

Once we have both the volume and Droplet IDs, we can proceed with the following command to attach a volume to a Droplet:

doctl compute volume-action attach your_volume_ID your_droplet_ID

This will produce an output similar to this:

Output
ID           Status         Type             Started At                       Completed At    Resource ID    Resource Type    Region
346253669    in-progress    attach_volume    2017-12-28 19:53:28 +0000 UTC    <nil>           0              backend          nyc3

Earlier in this tutorial, it was recommended that you attach a volume to the Droplet at creation time, in order to ensure that the Droplet is using infrastructure that supports block storage. If you created a Droplet without attaching a volume at that time, you might see the following error when trying to attach a volume to it:

Output
Error: POST https://api.digitalocean.com/v2/volumes/your_volume_ID/actions: 422 Droplet can't attach volumes due to a region restriction

If you encounter this error, you will not be able to attach the volume to the specified Droplet and will need to try again.

Once you have a volume successfully attached to a Droplet that accepts the volume, you can go on to the next section to learn how you can detach the volume in the case that you no longer need the extra space.

Detaching Volumes

There may be times in which you may need to attach a volume only temporarily to a Droplet, like when you are debugging an issue that requires a large amount of logs, or creating a backup of certain time-bound data. In these cases, we’ll need to be able to detach a volume once we are done using it.

Detaching a volume is similar to attaching a volume and uses the same pieces of information. The command and the output vary slightly.

doctl compute volume-action detach your_volume_ID your_droplet_ID

Output
ID           Status         Type             Started At                       Completed At    Resource ID    Resource Type    Region
346254931    in-progress    detach_volume    2017-12-28 19:57:51 +0000 UTC    <nil>           0              backend          nyc3

At this point, you know how you can detach a volume with doctl. In the next section, you will learn how to delete a volume that you no longer need.

Deleting Volumes

When you no longer need a certain block storage volume, you can detach it and then remove it from your account through deletion. Once you have detached a volume, to delete it you will need its ID.

doctl compute volume delete your_volume_id

Running this command will prompt for a confirmation:

Output
Warning: Are you sure you want to delete volume (y/N) ?

If you are satisfied that you would like to delete the volume, press y to confirm.

Once the volume is deleted you will be returned to the command prompt. You can verify that the volume has been deleted by using the list command.

Getting Information About a Volume

If you need information about a specific volume, you can request it by invoking the following command

doctl compute volume get your_volume_id

You will find the output of this command familiar because it is automatically run when creating a volume.

Output
ID                                      Name           Size      Region    Droplet IDs
______your_volume_ID1_______      firstvolume    100 GiB    nyc3

In this section you have learned how you can delete a volume that is no longer needed.

You now have all the information you need to successfully use doctl to work with DigitalOcean block storage volumes.

Conclusion

In this tutorial, we’ve learned how to use doctl to add, attach, detach, list, and delete volumes from our Droplets.

Now that you know how to do this, you may want to explore creating scripts and adding these scripts to your favorite automation tool, such as Jenkins or Drone.